This article provides a comprehensive tutorial for beginners on how to fix baseboards with big gaps or those that do not meet up properly. The tips and tricks mentioned in the article aim to help individuals in achieving a professional-looking finish on their baseboards.

The first step in fixing baseboards is to identify the problem areas, particularly gaps or unevenness where the baseboards do not meet up properly. Once these areas are identified, the next step is to gather the necessary tools and materials, such as a pry bar, sandpaper, wood filler, caulk, a putty knife, a miter saw, and a coping saw.

The article suggests using a pry bar to carefully remove the baseboards from the wall, taking caution not to damage them. This step allows individuals to have a better view of the gaps and determine the extent of the problem. Sandpaper can then be used to smooth out any rough edges and remove any existing paint or varnish.

After sanding, the next step is to apply wood filler to the gaps. The wood filler should be squeezed into the gaps and smoothed out using a putty knife. This helps to fill in any spaces and create a seamless surface.

Once the wood filler has dried, sanding can be done again to ensure a smooth and even finish.

To fix baseboards that do not meet up properly, the article suggests using a miter saw and coping saw. A miter saw can be used to create clean and precise angles for the baseboards. By carefully measuring and cutting the baseboards at accurate angles, individuals can ensure a tight fit and seamless appearance. A coping saw, on the other hand, can be used to create seamless joints when baseboards meet at corners. This tool helps to cut the baseboard at an angle that matches the contour of the adjacent board, resulting in a smooth and professional finish.

Finally, the article recommends using caulk to fill in any remaining gaps or cracks between the baseboards and the wall. Caulk is applied along the edges of the baseboards and smoothed out using a putty knife. Once the caulk has dried, touch up painting or varnishing can be done to complete the repair and give the baseboards a polished look.

In conclusion, this tutorial provides beginners with practical tips and tricks on how to fix baseboards with big gaps or those that do not meet up properly. By following the steps outlined in the article and utilizing the suggested tools and materials, individuals can achieve a professional-looking finish to their baseboards.