This article provides guidance on how to fix major mistakes when cutting laminate, vinyl plank (LVP), or engineered wood flooring. The aim is to empower individuals to tackle these mistakes like a professional in a do-it-yourself (DIY) manner.

The first step in repairing a big cutout mistake is to gather the necessary tools and materials. These include a circular saw, a jigsaw, a chisel, wood glue, filler putty, sandpaper, a rubber mallet, and replacement flooring planks. Once equipped, the fixing process can begin.

To start, measure the area where the mistake occurred and use a circular saw to make a series of straight cuts, parallel to the mistake perimeter.

These cuts should be close to each other but not exceeding the dimensions of the cutout itself. Gently remove the cutout piece using a chisel. This will create a clean-edged rectangular hole.

Next, measure the dimensions of the hole and transfer these measurements onto a new piece of flooring. It is necessary to ensure that the replacement piece matches the design and pattern of the existing flooring. This can be achieved by using a jigsaw to cut the replacement piece to the appropriate shape and size.

After preparing the replacement piece, it is time to apply wood glue to the edges of the hole. Carefully insert the replacement piece into the hole, ensuring a tight fit. Use a rubber mallet to gently tap the replacement piece into place, making sure it is level with the surrounding flooring.

Once the replacement piece is secured, the next step is to fill any gaps between the new piece and the existing flooring. Apply filler putty to the edges of the replacement piece and smooth it out to create a seamless appearance. Allow the putty to dry completely before moving onto the next step.

To achieve a polished finish, lightly sand the repaired area, blending it with the rest of the flooring.

This will help to eliminate any rough edges or noticeable discrepancies. It is important to be cautious and patient during this process so as not to damage the surrounding flooring.

Finally, once the repaired area is smooth and even, it is time to clean the floor and remove any dust or debris. Regular cleaning of the newly repaired flooring is essential to maintain its appearance.

In summary, fixing major cutout mistakes on laminate, vinyl plank (LVP), or engineered wood flooring can be accomplished by following these steps. With the right tools, materials, and attention to detail, individuals can repair these mistakes like a professional and achieve a seamless finish that blends in with the rest of the flooring.