This article provides a DIY guide on how to connect vinyl plank (LVP) flooring or laminate onto existing flooring. The main idea of the article is to offer step-by-step instructions for installing LVP or laminate on top of an existing floor.
To begin, the article advises readers to thoroughly clean and prepare the existing floor before the installation process. This involves removing any debris, dust, or dirt from the floor surface. Additionally, the article suggests ensuring that the subfloor is in good condition and free of any moisture or structural issues.
Next, the article recommends measuring the room and calculating the amount of LVP or laminate needed for the project.
Once the materials are ready, the article proceeds to explain the installation process. For LVP, the article suggests starting in a corner of the room and laying the first plank with the tongue side facing the wall. The planks should be tightly fitted together by angling and snapping them into place. The article advises using a tapping block and rubber mallet to secure the planks, ensuring they are level and properly aligned.
For laminate flooring, the process is similar. The article advises starting in a corner and working towards the opposite wall. It instructs readers to lay underlayment, if necessary, and then follow the manufacturer's instructions on connecting the laminate planks. The planks should be connected using the locking mechanism, typically by angling and snapping them together.
Throughout the installation process, the article stresses the importance of checking for any gaps or unevenness. It recommends using spacers between the planks and the wall to ensure an even, consistent gap. These gaps allow for expansion and contraction as the flooring adjusts to temperature and humidity changes.
After completing the installation, the article suggests using a roller to ensure the planks are securely attached to the subfloor. This helps to avoid any issues with loose or shifting planks over time.
Overall, this article provides a comprehensive guide on connecting LVP or laminate flooring to an existing floor. It emphasizes the importance of proper preparation, measurement, and installation techniques. By following these step-by-step instructions, readers can successfully complete a DIY flooring project and enjoy the benefits of a new, updated floor.
