If you have laminate, vinyl (LVP), or engineered floors that are uneven or have become loose, you might be wondering how to fix them without professional help. This DIY tutorial provides helpful tips and tricks to address these issues and restore the beauty of your floors.

To start, the article suggests inspecting the floor to identify the cause of the problem. Common causes include an uneven subfloor, an improper installation, or wear and tear over time. Once you have determined the cause, you can proceed with the appropriate solution.

If the unevenness is due to an uneven subfloor, the tutorial advises using a self-leveling compound.

This compound should be poured onto the low areas, and a trowel should be used to spread it evenly and create a level surface. After the compound has dried, you can proceed with installing the flooring as usual.

For loose flooring, the article explains that you will need a pry bar, adhesive, and a mallet. First, carefully lift the loose pieces using the pry bar, being cautious not to damage or break them. Then, apply adhesive to the subfloor and press the pieces firmly back into place. To ensure a secure bond, use the mallet to gently tap the pieces.

If the problem is with individual planks or tiles, the tutorial suggests using a glue injection method. This involves creating small holes in the loose plank or tile and applying adhesive through them. After the adhesive has been injected, you can use clamps or weights to apply pressure and allow the adhesive to set.

Additionally, the article provides some general tips to prevent future issues with laminate, LVP, or engineered floors. It advises ensuring that the subfloor is properly prepared before installation, using the correct underlayment, and allowing the flooring to acclimate to the room's temperature and humidity before installation.

Furthermore, the tutorial offers a helpful trick for fixing minor scratches on laminate or LVP floors. It suggests using a crayon or wax pencil that matches the color of the flooring to fill in the scratch. By rubbing the crayon or wax pencil over the scratch and then wiping away any excess, you can effectively hide the imperfection.

In conclusion, if you are faced with uneven or loose laminate, LVP, or engineered floors, this DIY tutorial provides practical tips and tricks to fix these issues. By following the steps outlined in the article, you can restore the smoothness and stability of your flooring and enjoy a beautiful and functional space.